

LWA-052-SNS-FN-E-0 KAMRULL-ÅKV AGN ALUMINIUM
Detaljer
Artikelnummer:
3918400
Lev. artikelnummer:
R190215200
Antal för köp av hel kartong:
1.0
Antal i lager:
0
Lagerstatus:
Leveranstid 6-8 dagar
Beskrivning
Denna komponent från Bosch Rexroth används för att ingå i det Rexroth-system och utförande som anges i produktens tekniska uppgifter. Utförandet väljs utifrån den anslutande konstruktionen och de krav som ställs på monteringen.
Typbeteckning: LWA-052-SNS-FN-E-0.
Egenskaper & fördelar
- Komponent i det utförande som specificeras nedan.
- Utförande: Cam roller guide.
- Smörjning: Without lubrication (dry).
Användningsområde
För konstruktion, montering eller underhåll där en komponent av detta utförande behövs. Kontrollera mått, infästning och systemtillhörighet mot den befintliga installationen före val av ersättningsdel.
Teknisk specifikation
| Utförande | Cam roller guide |
|---|---|
| Nominell storlek [mm] | 52 |
| Förspänningsklass | C0 – utan förspänning (spel) |
| Smörjning | Without lubrication (dry) |
| Höjd med styrskena [mm] | 54.3 |
| Maximal acceleration amax [m/s²] | 50.0 |
| Högsta tillåtna linjärhastighet vmax [m/s] | 10.0 |
| Anmärkning: Maximum permissible speed vmax | For average load. |
| Maximum permissible dynamic torsional moment about the x-axis Mx max [Nm] | 32 |
| Maximum permissible dynamic torsional moment about the y-axis My max [Nm] | 45 |
| Maximum permissible dynamic torsional moment about the z-axis Mz max [Nm] | 75 |
| Maximum dynamic load in y-direction Fy max [N] | 2500 |
| Anmärkning: Maximum dynamic load in y-direction Fy max | Observe the permissible lateral force of the guide rail (see instruction for mounting). |
| Drifttemperatur (min. … max.) | -20 °C ... +80 °C |
| Maximum static load due to a resulting force in the y-direction F0y max [N] | 2500 |
| Anmärkning: Maximum static load due to a resulting force in the y-direction F0y max | Observe the permissible lateral force of the guide rail (see notes for mounting). |
| Maximum operating temperature [°C] | +80 |
| Maximum dynamic load in z-direction Fz max [N] | 1500 |
| Minimum operating temperature [°C] | -20 |
| Mått A [mm] | 130 |
| Mått B [mm] | 136 |
| Mått B1 [mm] | 104 |
| Mått B2 [mm] | 16 |
| Mått E1 [mm] | 90 |
| Mått E2 [mm] | 70 |
| Mått E3 [mm] | 83.3 |
| Mått E4 [mm] | 60 |
| Mått H [mm] | 54.3 |
| Mått H1 [mm] | 19.4 |
| Mått H2 [mm] | 29.2 |
| Mått H3 [mm] | 29.2 |
| Mått SW1 [mm] | 16 |
| Mått SW2 [mm] | 4 |
| Mått SW3 [mm] | 6 |
Vanliga frågor
Hur är detta utförande smort vid leverans?
Bosch Rexroth anger Without lubrication (dry) för detta utförande.
Vilket underlag ska användas vid montering?
Utgå från Bosch Rexroths måttritning och anvisningar för just denna komponent. Produktens källsida länkar till tillgänglig dokumentation och övriga tekniska uppgifter.


